How water activity controls microbial growth

Microorganisms rely on available water in food for growth, and without it they are forced to go dormant. Learn how water activity (aw) governs microbial growth, which water activity limits apply to common bacteria, molds and yeasts, and how those limits are used in food safety regulation.

But how do you know how much water is available and which microbes will grow? In 1953, William James Scott showed that microbial growth in food is governed not by water content, as most people thought, but by water activity. Four years later, he established the concept of a minimum water activity for microbial growth. Water activity is now routinely used by food manufacturers to determine whether or not a product is susceptible to microbial proliferation.

‍

Key takeaways

  • Water activity and pH are the two most important intrinsic factors that determine if a product will support the growth of a spoilage microorganism. Their combined effect is more powerful than either one alone.
  • Each organism has a specific water activity at which it stops growing. Low water activity causes osmotic stress, so cells become dormant rather than being eliminated.
  • The growth limits in Table 1 assume all other conditions are optimal. Combined with lowered pH, microbial growth can be controlled at a higher water activity than shown.
  • Most microorganisms stop growing at a pH of 5.0. Some can go as low as 4.6 and even 4.4, and some problematic microbes can grow at pH 4.2.
  • Lowering pH will not directly lower water activity. Drying, baking and humectants lower water activity, while fermentation and added acids lower pH.

‍

Download the guidePDF · 6 pages

‍

Control water activity, prevent microbial growth

Like all organisms, microorganisms rely on available water in food for growth. They take up water by moving it across the cell membrane. This water movement mechanism depends on a water activity gradient—on water moving from a high water activity environment outside the cell to a lower water activity environment within the cell. When water activity outside the cell becomes low enough, it causes osmotic stress: the cell cannot take up water and becomes dormant. The microorganisms are not eliminated, they just become unable to grow enough to cause infection.

Different organisms cope with osmotic stress in different ways. That’s why there are different growth limits for each organism. Some types of molds and yeasts have adapted to withstand very low water activity levels. Table 1 shows water activity growth limits for many common microorganisms.

‍

Table 1. Water activity growth limits for many common microorganisms
aw Bacteria Mold Yeast Typical products
0.97 Clostridium botulinum E
Pseudomonas fluorescens
fresh meat, fruits, vegetables, canned fruit, canned vegetables
0.95 Escherichia coli
Clostridium perfringens
Salmonella spp.
Vibrio cholerae
low-salt bacon, cooked sausages, nasal spray, eye drops
0.94 Clostridium botulinum A, B
Vibrio parahaemolyticus
Stachybotrys atra
0.93 Bacillus cereus Rhizopus nigricans some cheeses, cured meat (ham), bakery goods, evaporated milk, oral liquid suspensions, topical lotions
0.92 Listeria monocytogenes
0.91 Bacillus subtilis
0.90 Staphylococcus aureus (anaerobic) Trichothecium roseum Saccharomyces cerevisiae
0.88 Candida
0.87 Staphylococcus aureus (aerobic)
0.85 Aspergillus clavatus sweetened condensed milk, aged cheeses (cheddar), fermented sausage (salami), dried meats (jerky), bacon, most fruit juice concentrates, chocolate syrup, fruit cake, fondants, cough syrup, oral analgesic suspensions
0.84 Byssochlamys nivea
0.83 Penicillium expansum
Penicillium islandicum
Penicillium viridicatum
Debaryomyces hansenii
0.82 Aspergillus fumigatus
Aspergillus parasiticus
0.81 Penicillium cyclopium
Penicillium patulum
0.80 Saccharomyces bailii
0.79 Penicillium martensii
0.78 Aspergillus flavus jam, marmalade, marzipan, glacé fruits, molasses, dried figs, heavily salted fish
0.77 Aspergillus niger
Aspergillus ochraceous
0.75 Aspergillus restrictus
Aspergillus candidus
0.71 Eurotium chevalieri
0.70 Eurotium amstelodami
0.62 Saccharomyces rouxii dried fruits, corn syrup, licorice, marshmallows, chewing gums, dried pet foods
0.61 Monascus bisporus
0.60 No microbial proliferation
0.50 No microbial proliferation caramels, toffees, honey, noodles, topical ointments
0.40 No microbial proliferation whole egg powder, cocoa, liquid center cough drop
0.30 No microbial proliferation crackers, starch-based snack foods, cake mixes, vitamin tablets, suppositories
0.20 No microbial proliferation boiled sweets, milk powder, infant formula

‍

Water activity and FDA, FSIS, FSMA

If you measure the water activity of any material, you will know which bacteria, molds, or fungi can grow on and in it. By reducing water activity, you can rule out the growth of certain classes of microbes. At low water activities you can preclude the growth of anything at all. Water activity is not a kill step. It’s a control step, and an integral part of many HACCP plans. These well-established microbial growth limits have been incorporated into FDA, FSIS, and other regulations. Water activity is part of the 2013 Food Code’s definition of potentially hazardous foods, which is referenced by the Food Safety Modernization Act (FSMA).

While temperature, pH, and several other factors can influence whether an organism will grow in a food product and the rate at which it will grow, water activity may be the most important factor. Most bacteria, for example, do not grow at a water activity range below 0.91, and most molds cease to grow at water activities below 0.70. Water activity in combination with other hurdles, such as pH, temperature, or modified atmosphere packaging, will limit microbial growth even at water activities higher than 0.91.

Learn more—Watch Water Activity 102

Everyone knows water activity is related to microbial growth. But how can you use that knowledge to your advantage in formulation, specification, production, and packaging? In this 30-minute webinar, learn:

  • What you need to know about how water activity predicts microbial growth
  • How to use specific organism aw limits relevant to your industry in setting your specs
  • How to use different formulation techniques (including humectants, films, coatings) to hit the water activity you need
  • Why you should consider hurdle technology to address certain challenges

Watch now: Water Activity 102 →

Frequently asked questions

Why does low water activity stop microbial growth?

Microorganisms take up water across the cell membrane, which depends on water moving from a high water activity environment outside the cell to a lower one inside it. When the water activity outside the cell becomes low enough, it causes osmotic stress: the cell cannot take up water and becomes dormant.

Does water activity kill microorganisms?

No. Water activity is not a kill step. It is a control step. The microorganisms are not eliminated; they just become unable to grow enough to cause infection. It is an integral part of many HACCP plans.

At what water activity do bacteria and molds stop growing?

Each organism has its own growth limit. Most bacteria do not grow at a water activity below 0.91, and most molds cease to grow at water activities below 0.70. Table 1 lists the limits for many common microorganisms and shows no microbial proliferation at 0.60 and below.

Is water activity the only factor that limits microbial growth?

No. Temperature, pH and several other factors can influence whether an organism will grow in a food product, although water activity may be the most important factor. Combining water activity with other hurdles, such as pH, temperature or modified atmosphere packaging, will limit microbial growth even at water activities higher than 0.91.

Drive your company’s total moisture performance

Learn how
AQUALAB instrument